SPECIALTY LUBRICANTS

KYNETX
Assembly Lubricant

8425300000-KN9014
12-32 fl. oz. (1 qt/.946 L) Bottles

TDS
SDS (US English)
SDS (Español)
SDS (Canada English)
SDS (Français)

1industrial1automotive1construction1heavy-auto
1agricultureMarine Markets1paper1steel
1energy1mining

PRODUCT DESCRIPTION
Assembly Lubricant is a water based emulsion designed to aid in the assembly process for the installation of all types of rubber tubing, rubber hoses, and tires; where the intention is not to swell or shrink and provide a high degree of lubricity while wet.

BENEFITS
• Specially formulated to lubricate rubber for easier installation, removal and manipulation
• Provides temporary lubrication as lubricant disappears and surfaces return to original condition
• Provides high degree of lubricity while wet

Assembly Lubricant_32oz_LR

KYNETX
Camshaft and Follower Lubricant

8435000000-KN7014
12-8 fl. oz. (240 ml) Cans

TDS
SDS (US English)
SDS (Español)
SDS (Canada English)
SDS (Français)

1industrial1construction1heavy-auto1agriculture
Marine Markets1paper1mining

PRODUCT DESCRIPTION
Camshaft and Follower Lubricant is designed to be used as a lubricant to apply to potential wear surfaces before assembly in order to prevent metal to metal contact upon startup before adequate lubrication is supplied. Provides three times greater film strength than conventional motor oils and will not clog oil filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing the storage of parts for many months. A thin film of protection is all that is required on mating parts. Camshaft and Follower Lubricant will mix with motor oil and can be used on all lubricated parts such as followers, pistons, bearings, and bolt threads. Use only a small amount on bearing and piston surfaces – too much can make it difficult to turn over the engine. Camshaft and Follower Lubricant is an excellent corrosion inhibitor and can be used on machined surfaces to provide long-term corrosion protection. Do not use on exhaust bolts or other high temperature bolts which require an anti-seize. This product is also an excellent polishing oil for camshafts or crankshafts.

BENEFITS
• High viscosity to cling to unassembled parts
• Excellent anti-wear package to prevent excessive wear on startup
• Very low odor provides for good operator acceptance
• Excellent stick-slip lubrication to assure smooth break in
• Designed to be painted on the metallic surface, or whole parts may be dipped if desired

Camshaft and Follower_8oz can_LR

KYNETX
Moly Chain & Cable Lubricant

9600000011-KN7015
12-15 oz. (425 g) Cans

TDS
SDS (US English)
SDS (Español)
SDS (Canada English)
SDS (Français)

1industrial1construction1agriculture

PRODUCT DESCRIPTION
Moly Chain and Cable Lubricant provides superior penetrating action to rollers, pins, links and bushings of chains. When applied to wire ropes and cables, the Moly and other additives plate the strands to provide anti-wear and rust protection.

BENEFITS
• Reduces wear caused by friction and corrosion
• Lubricant and corrosion protectant
• Deep penetration to the core of wire ropes
• Increases the life of chains and wire ropes

Moly Chain and Cable Lubricant

KYNETX
Dry Moly Film Lubricant and Coating

9600000376-KN9005
12-12 oz. (340 g) Cans

TDS
SDS (US English)
SDS (Español)
SDS (Canada English)
SDS (Français)

1industrial1automotive1construction1heavy-auto
1agricultureMarine Markets1paper1steel
1energy1mining

PRODUCT DESCRIPTION
Dry Moly Film Lubricant And Coating is an extreme condition, dry, friction reducing lubricant and anti-seize coating. Withstands high temperatures and extreme pressures. Provides a dry film lubricant especially suited for use in dirty or dusty atmospheres. Burnishes into metal to provide long term lubrication and protection. Inert to water, oil, alkalis, and acids. Contains no methylene chloride.

BENEFITS
• Non-corrosive, non-conductive, waterproof
• Film has low coefficient of friction
• Provides excellent lubricating properties
• Does not attract dust or dirt
• Adheres to metals, rubber, glass, and most plastics
• Inert to water, oil, alkalies, and many acids
• Resists temperatures from -110° to 1050°F (-79° to 566°C) and pressures to 100,000 psi

Dry Moly Spray Lubricant

KYNETX
Calibration Fluid

2200100000-KN5020
5 gal. (18.93 L) Pail

TDS
SDS (US English)
SDS (Español)
SDS (Canada English)
SDS (Français)

1heavy-auto1construction

PRODUCT DESCRIPTION
Calibration Fluid is specifically formulated for use as a calibrating fluid in fuel injector test benches and pop testers.

BENEFITS
• Meets the requirements of SAE J967d and ISO/DIS 4113
• Conforms to Caterpillar spec 1E 1084 (12/16/1998) CAT Part # 6V-6068
• Application section from CAT Calibration Fluid IE 1084
• Formulated for use as a calibrating fluid in fuel injector test benches and pop testers

Calibration Fluid